User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-873MEM-BD (Memory)
10
Memory Board Check Test (#631)
This test always passes.
Table 10-251. TEST #332 Memory Functional Test
Error
Code
Test
Result Description/Recommendation
1000 ABORT System resources required to run this test are not available.
1. Repeat the command at 1-minute intervals a maximum of three times.
1029
2014
2015
2016
2017
2018
2020
2022
2024
2025
2051
ABORT Refer to “STBY-SPE” for a description of these error codes.
FAIL The Standby SPE Memory is defective.
1. Repeat the command at 1-minute intervals a maximum of 5 times.
2. The Processor circuit pack should be replaced.
PASS The Standby SPE Memory circuit pack(s) is healthy.
Continued on next page