User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-691EXP-INTF (Expansion Interface Circuit Pack)
10
Table 10-197. TEST #336 Expansion Interface Reset Test
Error
Code
Test
Result Description/ Recommendation
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
4 ABORT Could not reset EPN Expansion Interface circuit pack over optical
fiber since PPN Expansion Interface circuit pack on opposite end of
fiber is not inserted.
1. Insert opposite Expansion Interface circuit pack and perform
reset again.
1015 ABORT The system does not allow this test to be run because the
Expansion Interface circuit pack has not been busied out.
1. Busyout the Expansion Interface circuit pack. Repeat the reset
board PCSS command.
2000 ABORT Response to the test request was not received within the allowable
time period.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
9999 ABORT Expansion Interface circuit pack reset successfully. Could not
perform initialization test results query because link to EPN is not
up.
1. Execute release board PCSS. Wait one minute. Issue the
display error command. If you see Error Type 2049 logged
against this Expansion Interface circuit pack, then the
Expansion Interface Reset Test has failed with an error code
equal to the aux data of this entry. Otherwise, the initialization
tests have passed.
12000 ABORT Expansion Interface circuit pack reset successfully. Response to
the initialization test results query was not received within the
allowable time period.
12100 ABORT Expansion Interface circuit pack reset successfully. System
resources required to run initialization test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page