User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-350CO-TRK (CO Trunk)

1018 ABORT The test was disabled via administration. Verify that the

’Maintenance Test’ field on the ’Trunk Group’ form is set to

’n’. To enable the test, issue the ’change trunk-group x’

command (x equals the number of the trunk group to be

tested). Then, change the entry in the ’Maintenance Test’

field on the form to ’y’.

1. Retry the command at 1 minute intervals a maximum of 5

times.

2. If the test continues to abort, escalate the problem.

2000 ABORT Response to the test was not received within the allowable

time period.

1. Retry the command at 1 minute intervals for a maximum

of 5 times.

2. If the test continues to abort, escalate the problem.

2100 ABORT Could not allocate the necessary system resources to run

this test.

1. Retry the command at one-minute intervals a maximum

of five times.

2. If the test continues to abort, escalate the problem.

Table 10-97. TEST #33 Loop Around and

Conference Circuit Test — Continued

Error

Code

Test

Result Description/ Recommendation

Continued on next page