User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-260CARD-MEM (Memory Card)
10
Table 10-81. TEST #699 Memory Card Directory Recovery Test
Error
Code
Test
Result Description/ Recommendation
1192 ABORT Contention error. Applications are accessing the memory card.
1. Wait 10 minutes for the applications to complete.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2012
2106
2114
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2013
2100
none
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2108 ABORT The NETCON circuit pack is not a TN777B circuit pack.
1. Follow the Standard Repair Procedures for replacing the NETCON
circuit pack with the TN777B circuit pack.
2. Re-enter the test card-mem command.
2110 ABORT No memory card is inserted.
1. Insert a formatted memory card into the slot at the TN777B NETCON
circuit pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2111 ABORT Inserted memory card cannot be recognized.
1. Insert a new formatted memory card into the slot at the TN777B
NETCON circuit pack.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2112 ABORT Internal system error The inserted memory card is a "system-upgrade"
memory card.
1. Replace the inserted memory card with a user’s memory card.
2. Retry the command at 1-minute intervals a maximum of 5 times.
2115 ABORT The memory card is write-protected.
1. Take the memory card out, flip the "write-protection" switch to the
"not-protected" position, and insert the memory card back into the slot.
2. Retry the command at 1-minute intervals a maximum of 5 times.
Continued on next page