User Guide

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-195BRI-SET, ASAI-ADJ, BRI-DAT
10
m. Certain ISDN-BRI cause codes are logged by switch software. The cause
code can be determined from the following formula:
If the error type is greater than 3968, then the ISDN-BRI cause code is
equal to the error type minus 3968. This code was sent to the endpoint by
the switch.
If the error type is less than 3968, then the ISDN-BRI cause code is equal
to the error type minus 3840. This code was sent to the switch by the
endpoint.
A description of the various ISDN-BRI cause values is contained in Table
10-65. This table also contains recommended system technician actions
associated with the cause value. Further information can also be found in
SERVICE OR
OPTION NOT
IMPLEMENTED
79 SERVICE OR
OPTION NOT
IMPLEMENTED
Requested service or option (or combination of
selected options) is not supported (implemented) in
switch or the adjunct.
1. Consult switch and adjunct documentation to
determine ASAI service and options supported
by both switch and adjunct. Readministration of
the switch-administered capabilities (see
Customer Optional Feature Form) or those of
the adjunct may be necessary to correct the
problem.
2. If Step 1 does not provide the set of desired
services due to deficient implementation,
escalate the problem to the next tier.
SWITCH
ERROR
CONDITIONS
87 Internal switch
audit
There is an inconsistency in switch data records.
1. There is no action needed since the switch has
corrected the data inconsistency.
2. If a number of these errors continue to occur,
then escalate to next tier.
Table 10-64. ASAI Cause Values — Continued
Code Explanation Recommendation
Continued on next page