User Guide

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-136ASAI-EPT

Table 10-45. TEST #626 Signaling Link Status Test

Error

Code

Test

Result Description/ Recommendation

1139 ABORT The Packet Bus in the port network is out-of-service.

1. Follow the repair procedures for the Packet Bus.

2. After completing Step 1, execute the test port long PCSSpp command

and review the results of the BRI Port Local LAN Looparound Test to

verify the repair.

1141 ABORT The PKT-CTRL is out-of-service.

1. Refer to PKT-CTRL maintenance documentation.

1144 ABORT The PPN Packet Bus is out-of-service.

1. Follow the repair procedures for the Packet Bus in the PPN.

2. Execute the test port long PCSSpp command and review the results of

the BRI Port Local LAN Looparound Test to verify the repair.

2012 ABORT Internal system error

2100 ABORT Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals a maximum of 5 times.

1113 FAIL The signaling link is not "bound" to the adjunct. For ASAI adjuncts this error

indicates that the link is disconnected at Layer 2. Since the signaling link

associated with the endpoint has been identified by administration, the link

is only "unbound" from the endpoint when it is disconnected.

1. Execute the status bri-port PCSSpp command and refer to the

associated procedures for this command contained in “BRI-PORT”.

PASS The signaling link is connected at Layer 2 and "bound" to the ASAI adjunct.

Continued on next page