User's Manual

Enabling/Disabling the Status Lights for the PassageWay Connection

(For the 8411 Only)

If a PC for the PassageWay Solution has been connected to the

RS-232-D jack on the rear of the 8411, the user can use Button #9 (the

next-to-last button in the second column) to see the status of the PassageWay

connection. For a list of PassageWay indications, see “PassageWay and Analog

Adjunct Status Indications on the 8411” earlier in this manual.

To enable or disable the status lights for the PassageWay connection

1. While on-hook, press .

• The light next to goes on.

2. Press .

• The light next to goes off.

3. Enter the 2-digit code, “79” (“PW”).

• The red and green lights next to Button #9 flutter.

• The current setting (ENABLE PWY STATUS LAMPS or DISABLE

PWY STATUS LAMPS) is shown on the display, if there is one.

4. Press either “1” or “2” to change the setting:

• Press “1” to enable the status lights for the PassageWay connection (next to

Button #9)

• Press “2” to disable the status lights for the PassageWay connection

or if the voice terminal has a display, press to change the setting. Press

to save the desired option and then exit programming.

• After pressing “1” or “2” or pressing , the light next to goes

off and one of the following voice terminal responses occurs:

If the voice terminal saves your selection, the first three green call

appearance lights go on and, if you have a display, a confirmation

message is displayed.

If the voice terminal cannot save this selection, the first three red call

appearance lights go on and, if you have a display, an error message is

displayed. In this case, the selected option will be in effect until power is

removed from the set. If this happens, try repeating the process. If the

option still cannot be saved, the terminal may be faulty.

OTHER 8400-SERIES VOICE TERMINALS

DOCUMENTATION

The following documentation provides instructions for using both the fixed and the

switch features. These documents can be ordered from the Lucent Technologies BCS

Publications Center.

Shift

Mute

Shift