User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Overview
- Cajun P333T Front and Rear Panels
- Applications
- Installation and Setup
- Cajun Campus CLI (Command Line Interface)
- Conventions Used
- Establishing a Serial Connection for Configuration
- Establishing a Telnet Session
- Running the CLI
- Security Levels
- General Commands
- Navigation, Cursor Movement and Shortcuts
- Getting Help
- Command Syntax
- Commands, Parameters and Default Settings
- Specifications
- Cajun P330 Standalone Manager
- How to Contact Us
Chapter 5 Cajun Campus CLI (Command Line Interface)
38 Cajun P333T User’s Guide
Output Fields
Show flowcontrol command
Use the show port flowcontrol command to display per-port status information
related to flow control.
The syntax for this command is:
show flowcontrol
[mod_num/port_num]
Example:
This example shows how to display the flow-control port status and statistics:
Console>
show flowcontrol
Field Description
Mod Module number.
Module-Type Module Type
Ports Number of ports on the module.
Serial-Num Serial number of the module.
C/S (Hardware) Configuration Symbol of the module
Sw Software version on the module.
mod_num (Optional) Number of the module.
port_num (Optional) Number of the port on the module. If you do not
specify a number, filters configured on all the ports on the
module are shown.
Port Send-Flowcontrol Receive-Flowcntl
Admin Oper Admin Oper
----- ---------- ------ -------- --------
3/2 off off off off
3/3 on on off off