User's Manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Overview
- Cajun P333T Front and Rear Panels
- Applications
- Installation and Setup
- Cajun Campus CLI (Command Line Interface)
- Conventions Used
- Establishing a Serial Connection for Configuration
- Establishing a Telnet Session
- Running the CLI
- Security Levels
- General Commands
- Navigation, Cursor Movement and Shortcuts
- Getting Help
- Command Syntax
- Commands, Parameters and Default Settings
- Specifications
- Cajun P330 Standalone Manager
- How to Contact Us
Chapter 5 Cajun Campus CLI (Command Line Interface)
Cajun P333T User’s Guide 35
The syntax for this command is:
show image version
[mod_num]
If a module number is not specified, the image version of the all modules will be
displayed.
Example:
Console> show image version
Show snmp command
Use the show snmp command to display SNMP information.
The syntax for this command is:
show snmp
Example:
Console> show snmp
Console>
mod_num (Optional) Number of the module to display its image version
Mod Module-Type Bank Version
------- ---------------- ------- ----------
1.1. 24x10/100Base-T with optional expansion slot A 1.0.2
1.2. 24x10/100Base-T with optional expansion slot B 1.0.2
Community-Access Community-String
_______________ _______________
read-only public
read-write private
trap secret
Trap-Rec-Address Traps Enabled
--------------------- -----------------
192.122.173.42 config, fault etc