User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-121ANNOUNCE (Announce)
3
ANNOUNCE (Announce)
The ANNOUNCE MO logs an error in the hardware error log if at least one of the
following is true:
■ The
save announcements
or
restore announcements
command does
not complete successfully, or the
■ System fails to restore announcements from the memory card at boot time.
Figure 3-2
shows the connection of the Announcement Circuit Pack to the
system. To save or restore announcements, an ANNOUNCEMENT Data
Extension must be administered, and at least one DATA-CHL (Network Control
Data Channel) must be in the in-service/idle state.
Figure 3-2. Connection of announcement circuit pack to the system
MO Name (in
Alarm Log) Alarm Level
Initial Command to
Run Full Name of MO
ANNOUNCE none none ANNOUNCEMENT
Switch Software Applications
Network Control
DATA
CHL1
DATA
CHL4
DATA
CHL3
Announcement
Circuit Pack
DATA
CHL2
Data-CHL
Software
Data-CHL
Software
Data-CHL
Software
Data-CHL
Software
PR-MAINT
CARD-MEM
TN798 Processor
TDM bus
cydmacps RPY 062397