User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-378test sys-link
2
Output
The following screen is an example of the output for the
test synchronization
short
command. The responses are displayed on a test-by-test basis with one
line of data for each test result.
Field descriptions
test sys-link
This command validates the specified link and runs diagnostic tests on the
hardware objects that comprises the system link. If the
current or faulted options
are specified, tests are run on all hardware objects that comprise the specified
link. If
current or faulted is not specified, only the end-to-end sys-link connection
is tested.
The hardware path that comprises a system link consists of up to 21 hardware
components that affect the behavior of the link. The number of components of a
given system link hardware path depends on the system configuration and type
of system link.
Port
Not applicable
Maintenance
Name
Maintenance object name
Alt. Name
Not applicable
Test No.
Test being executed
Result
Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
test synchronization short
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
SYNC 417 PASS
Command Successfully Completed