User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-354test memory
2
The following LEDs are NOT lighted by the
test led
command:
■ Power Unit LEDs
■ Yellow (amber) LED on the tape drive
test memory
This command performs hardware diagnostic tests on any or all memory circuit
packs in the specified carrier. Both short and the long test are nondestructive
when testing memory.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
test led
all
cabinet
number
short
long
repeat
number
All LEDs in all carriers are tested
Cabinet number (each carrier
tested sequentially)
Simplex: short and long option are
identical and turn on and off all
leds in the specified port network.
Short and long option are identical
and turn on and off all leds in the
specified port network.
Number of times each test in the
sequence is repeated (1-100)
Examples:
test led
test led all r 2
test led cabinet 1
test led c 1
test led 1 long
init
inads
craft
all; repeat
= 1; test
sequence
= short in a
duplex
system
none