User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-300status station
2
Output
The following example shows the output for the
status station 1002
command.
Field descriptions
Type
Administered station type
Extension
Station or attendant extension
Port
Port location: cabinet-carrier-slot-circuit
Call Park
Whether the station has a call parked (
yes
or
no
)
Ring Cut Off
Activated
Whether ring cut off is activated (
yes
or
no
)
CF
Destination
Ext
Call forwarding destination extension, if any.
Message
Waiting
Whether there is a message waiting for the station. “AP-SPE”,
“AUDIX”, “PMS” or blank if no messages are waiting.
Connected
Ports
Port locations of the facilities to which the station is connected:
cabinet-carrier-slot-circuit
Agent Logged
In
Displays (underneath) the hunt groups (up to 3) that the agent is
logged into
On ACD Call?
Whether the agent is on an ACD call currently (
yes
or
no
).
status station 1002
GENERAL STATUS
Type: 7405D Service State: in-service/on-hook
Extension: 1002 Download Status: not-applicable
Port: 01C0702 SAC Activated? no
Call Parked? no User Cntrl Restr: none
Ring Cut Off Act? no Group Cntrl Restr: none
Active Coverage Option: 1 CF Destination Ext:
Message Waiting:
Connected Ports:
ACD STATUS HOSPITALITY STATUS
Grp/Mod Grp/Mod Grp/Mod Grp/Mod Grp/Mod AWU Call At:
/ / / / / User DND: not activated
/ / / / / Group DND: not activated
/ / / / / Room Status: non-guest room
/ / / / /
On ACD Call? no
Command: