User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-293status pri-endpoint
2
■ Port 6 of the specified PRI endpoint is out of service, and background
maintenance testing is being performed on the port.
NOTE:
A PRI endpoint can initiate and receive a call on any one or more of the
B-channels making up the PRI endpoint.
Note that the line listing of each B-channel’s status may continue onto the next
page. The user is prompted to press the
NxtPg key to continue the display.
Field descriptions
Extension
PRI endpoint extension
Width
Administered number of B-channels associated with the specified
PRI endpoint
Signaling Group
ID
ID number of the signaling group that handles the signaling for the
ports in the specified PRI endpoint
Originating Auto
Restoration
Administered option for the auto restore feature (restores calls
originated from this PRI endpoint in the case of network failure):
y
= restoration option enabled
n
= restoration option disabled
B-Channels Active
The number of B-channels active on a call
B-Channels Idle
The number of B-channels in the in-service/idle state
Port
Port locations (cabinet-carrier-slot-circuit) for each of the
B-channels making up the PRI endpoint.
status pri-endpoint 22501 page 1 of 1
PRI-ENDPOINT STATUS
Extension: 22501 Width: 6
Signaling Group ID: 3 B-Channels Active: 3
Originating Auto Restoration? n B-Channels Idle: 2
Port Service State Test In Progress Connected Port
01B2001 in-service/active n 01B1913
01B2002 in-service/active n 01B1914
01B2003 in-service/active n 01B1915
01B2004 in-service/idle n
01B2005 in-service/idle n
01B2006 out-of-service-NE y
Command Successfully Completed