User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-251status conference
2
Field descriptions (status conference endpoint)
The
status conference
x endpoint y command specifies that the conference is
found. Data relevant for each endpoint displays in 6 pages. If technicians use the
endpoint-ID
all
, every specified endpoint displays.
Page 1 - Status Conference Endpoint
Screen 2-10. Page 1 of 6: status conference x endpoint y
Field descriptions
Endpoint
Slot number associated with the endpoint on the conference forms.
Product
Product identification number obtained from the endpoint.
Manufacturer/
Country
Manufacturer identification number and manufacturer’s country code
obtained from the endpoint.
Terminal Name
Blank.
Sum Grp
Endpoints belong to this Summer group number and the VC Audio
Level (L1) and Level 2 (L2) summer ports for this group. These fields
supply entries for conferences with over 6 participants.
Dial Out #1
Dial Out #2
Blank
Blank
status conference endpoint page 1 of 6
STATUS OF CONFERENCE ___ ENDPOINT: __ Status: ________
Ext: _____ Type: ____ Manufacturer/Country: ____/____ Product: _____
Terminal Name: _______________ Data Mode: _________ MLP Rate: ____
Admin Bandwidth: ____ Rate Adaptation: _
Conf Bandwidth: ____ Lo/Hi Interworking: _
Meet-Me Number: ____________________ Dial Out #1: _______________________
Sum Grp: _ L1: ______ L2: ______ #2: _______________________
Quadrature: ______ ________
ENDPOINT STATES/CAPABILITIES/MODES
In Enh ----Capability---- Rate Bond
Use BAS Chl Aud Vid Mlp Gx Adpt Mode Ts Vs
- - - - - - - - - - -
Help line
enter command: