User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-13csi design
1
Figure 1-1. Compact Modular Cabinet (CMC) slot configuration
■ The RISC-based TN798 Processor circuit pack must be located slot 1.
Figure 1-1
also shows the Flash Memory Card slot for translations.
■ TN2182 Tone-Clock must be installed in slot 2. This is the only Tone-Clock
circuit pack allowed in the CMC.
■ Service circuit packs the only packs allowed in the CMC. These
“universal” service packs can be located in any slot numbered 3-10.
■ AUDIX, if present, requires 4 slots (slots 6-9 on the top row).
■ MAPD requires 2 slots if administered in slot 7, otherwise, installation
requires 3 slots.
scdmlft2 KLC 070397
51
6