User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-217status administered-connection
2
status administered-connection
This command provides automatic end-to-end connections between two
access/data endpoints.
Output
The following example shows the output from the
status
administered-connection 3
command.
Communication
Type
The valid voice and data communication type that the access
endpoint is administered. The options are: 56k-data, 64k-data,
voice-grade-data, and wideband.
Width
For 56k-data, 64k-data, and voice-grade data, the width value is 1. For
wideband, this field displays the number of DS0s that make up the
access endpoint.
Service State
in-service/active
,
in-service/idle
, and
out-of-service
Connected
Ports
Port location connected to the access endpoint for an active call. For
wideband, all ports connected to the wideband access endpoint are
listed.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
administered-
connection
ac
number
print
Administered connection number
Report sent to printer.
init
inads
craft
cust
rcust
bcms
browse
none none
status administered-connection 3 page 1 of 1
ADMINISTERED-CONNECTION STATUS
Connection Number:
Enabled?
Originator:
Destination:
Connection State:
Failure Cause:
Number of Retries:
Auto Restorable?