User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-216status access-endpoint
2
status access-endpoint
This command displays the status of an access endpoint and can be helpful in
locating facilities with which access endpoints communicate.
Output
The following example shows the output for the
status access-endpoint 22502
command. The command assumes that access endpoint ports for extension
22502 are in cabinet 1, carrier C, slot 11, circuit 1 to 6 — that access endpoints
are connected on an active call to ports 7 to 12 of the board in location 1B19
(cabinet 1, carrier B, slot 19). This means that port 01C1101 connects to
01B1907, port 01C1102 connects to 01B1908, and port 01C1103 connects to
01B1909.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
access-
endpoint
extension
print
Extension number of the access
endpoint
Report sent to printer
init
inads
craft
cust
nms
browse
none none
Extension
Extension of the access endpoint
(Starting)
Port
Port locations of the access endpoint. For wideband access endpoint,
the location shown is that of the starting port.
status access-endpoint 22502 page 1 of 1
ACCESS-ENDPOINT STATUS
Extension: 22502
(Starting) Port: 01C1101
Communication Type: wideband
Width: 6
Service State: in-service/active
Connected Ports: 01B1907 01B1908 01B1909
01B1910 01B1911 01B1912
Command Successfully Completed