User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-206set options
2
set options
command default settings specified in this section. Technicians
should not change these settings. Special circumstances (for example, special
studies) may require temporary changes under the guidance of Tiers 3 and 4.
NOTE:
Alarms do not upgrade.
Form Input
The following example is a display of the
set options
command.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
set options
none init
inads
see
below
none
set options Page 1 of 8
ALARM REPORTING OPTIONS
Major Minor
On-board Station Alarms: w w
Off-board Station Alarms: w w
On-board Trunk Alarms (Alarm Group 1): y y
Off-board Trunk Alarms (Alarm Group 1): w w
On-board Trunk Alarms (Alarm Group 2): w w
Off-board Trunk Alarms (Alarm Group 2): w w
On-board Trunk Alarms (Alarm Group 3): w w
Off-board Trunk Alarms (Alarm Group 3): w w
On-board Trunk Alarms (Alarm Group 4): w w
Off-board Trunk Alarms (Alarm Group 4): w w
On-boar Adjunct Alarms: w w
Off-board Alarms: w w
Off-board DS1 Alarms: w w
Off-board PI-LINK Alarms: w w
Off-board Alarms (Other): w w
Memory Card Capacity Alarms: y