User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-205set options
2
Output
The following example shows the output from the
save translation
command.
Error Codes are as follows:
■ 0 - save successful
■ 1 - could not write to the active device
■ 2 - could not write to the standby device
Field descriptions
set options
This command enables a remote user with INADS permission to select which
types of maintenance categories report alarms automatically and which types
require customer call-in. Judicious use of this command can reduce the number
of ineffective alarms to the TSC. For effective results, technicians should use the
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
save
translations
spe-active
Translations saved on the
active processor’s MSS
device.
init
inads
craft
cust
none If translation
data changes
due to
administrative
commands,
save
translation
cannot be
performed.
Processor
Identifies the processor carrier where translation data is
saved. (SPE-A)
Command
Completion Status
Displays a variety of messages, identifying the success
or failure of the command.
save translation
SAVE TRANSLATION
Processor Command Completion Status Error Code
SPE-A Success 0
Command Successfully Completed