User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-195release trunk
2
release trunk
This command removes specified trunk groups or trunk group members from a
maintenance busy state. Specifying the group number releases a single group
member and the member number; specifying the trunk group number releases
members in a trunk group.
Output
The following example shows the output from the
release trunk 78/1
command.
Field descriptions
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release trunk
group
member
1–99.
1–99
init
inads
craft
none none
Port
Port address (cabinet-carrier-slot-circuit) of the released
maintenance object.
Maintenance Name
The type of maintenance object that is being released.
Alt. Name
Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk
xxx/yyy (where xxx = trunk group number
and
yyy = member number)
private CO line
P/xxx (where xxx = private CO line group
number)
release trunk 78/1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1505 CO_TRK 78/01 PASS
Command successfully completed