User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-149list suspend-alm-orig
2
GAP reasons:
0x01 - disabled, disable mst command executed
0x02 - disabled, mst timer expired
0x03 - disabled, buffer full on no-wrap
0x04 - disabled, restart occurred
0x05 - disabled, by stop trigger or count
0x06 - disabled, audit error
0x07 - not disabled, stopped by stop trigger or count
0x72 - Time changed while trace enabled
timestamp indication:
0x00 - MST timestamp is old time
0x01 - MST timestamp is new time
list suspend-alm-orig
This command lists active entries in the Suspend Alarm Origination table. Even
though this command only lists active entries, an entry that expires during the list
process still appears in the output. If the Suspend Alarm Origination table is
empty, the output contain only the title and field headings.
Message[1] = 0x00
Message[2] = timestamp indication
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list
suspend-alm-
orig
print
schedule
Report sent to printer.
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
1
Examples:
list suspend-alm-orig
list suspend-alm-orig print
list suspend-alm-orig schedule
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
none none