User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-111list history
2
Field descriptions
list history
This command generates a log listing of the most recently completed “data
affecting” administration and maintenance commands. Data commands are
those administration and maintenance commands that change the data state
associated with any object and qualifier in the system. Administration data
commands affect translation data, while maintenance data commands affect
state information. For example,
change station
is a data command, whereas
display station
is not.
All information in the transaction log is saved on tape as translation data when
the
save translation
command is performed (LIFO order). When the switch
COLD I starts or reboots, the saved translation, and thus the transaction log, is
loaded from tape. In this way, the translation data and the data in the transaction
log remain compatible.
Port
Port address
1
1 The special locations UUmajor and UUminor (see Screen 2-6) designate the name of the major
or minor maintenance circuit pack alarm connection for cabinet UU (depends upon the auxiliary
connector of the Port Network). Thus, both a “major” and “minor” port can be administered with
major, minor, or warning alarms.
Alarm Type
The alarm level for this external device alarm port. Entries are
major
,
minor
(default), or
warning
.
Alt. Name
7-character adjunct short name for this external device alarm
Description
40 character adjunct description for the external device alarm
Product
Identifier
10-digit product identifier of the external device alarm (leading
zeroes are significant and retained). If the field is blank (default),
alarms associated with the connected adjunct use the switch
product identifier administered on the Change System-Parameters
Maintenance screen.
Building
A 40-character description of the external device alarm’s building
location
Address
A 40-character building address