User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-97enable test-number
2
enable test-number
This command enables a previously disabled test number. At the next request by
maintenance or the technician, this test number will run.
format card-mem
This command erases and formats the active processor Flash Read-Only
Memory card before writing translation, announcements, coredump, and
firmware data.
get vector
This command displays the conditions and the Switch Processing Element (SPE)
associated with a core dump of memory to tape or memory card. The dump
occurs on the tape or disk of the previously active SPE or the SPE previously
specified using the
set vector
command in systems with duplicated SPEs.
!
CAUTION:
The vector is cleared when a system restart of the proper level is performed
regardless of whether the core is actually dumped.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
enable
test-number
number
The specific test number
to re-enable
Example:
enable test-number 102
init
inads
craft
none The
display
disabled-tests
command gives
a list of all
disabled tests.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
format
card-mem
translation
announcements
coredump
firmware
Erases and formats the memory
card for:
translations only
translations and announcements
translations, announcements, and
coredump
translations, announcements
coredump, and firmware
init
inads
craft
cust
browse
system
none none