User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-64display errors
2
Form output
After completing the options screen, the system displays a 1- or 2-page
Hardware Error Report. To toggle between the pages and to exit the report, use
the keys described below:
■ For 513 and 715 terminals, use
F8
for NEXT PAGE and PREV PAGE commands
■ For all other terminals, use
F7
for NEXT PAGE and PREV PAGE commands
■ Use
Esc
for the
CANCEL
command
The screen below is an example of an Hardware Error Report -- Active Alarms,
without
the high-resolution qualifier in the command line.
Field descriptions
Extension
Enter the extension number
Trunk
Enter a group number or a group and member number:
■ Enter only the
group
number (01-99) to display all members in
the group. Example: 01/__
■ Enter both the
group
number (01-99) and
member
number
(01-99) to display a
specific member in a group. Example:
01/99.
Port
Lists the location codes for the alarmed object, as follows:
■ Circuit packs locations display as:
cabinet-carrier-[slot]-[circuit]. Example: 01C702.
■ Port network locations display as: port network number-bus.
Example:
PN 01B
. PN 01 = Port Network (PN) number and A
or B = bus.
display errors Page 1 SPE A
HARDWARE ERROR REPORT - ACTIVE ALARMS
Port Mtce Alt Err Aux First Last Err Err Rt/ Al Ac
Name Name Type Data Occur Occur Cnt Rt Hr St
01C0702 ANL-LINE 311 257 01/31/09:20 01/31/20:26 255 256 255 a y
01C0701 ANL-LINE 1051 257 01/31/20:26 01/31/20:26 4 0 4 a y
01C0703 ANL-LINE 1053 257 01/31/20:26 01/31/20:26 4 0 4 a y
01A TDM-CLK 0 0 01/31/20:34 01/31/20:34 1 0 1 a n
01C1505 CO-TRK 078/001 3329 57408 01/31/20:26 01/31/20:27 5 300 5 a y
01C1505 CO-TRK 078/001 1537 01/31/20:26 01/31/20:28 5 150 5 a y
Command successfully completed