User manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Objects
3-545DLY-MTCE (MO-DAILY)
3
DLY-MTCE (MO-DAILY)
The DLY-MTCE maintenance object monitors daily translation saves. If a
translation save times out or fails to run, an error is logged against this
maintenance object.
Daily Maintenance Interference
All of the actions used in DEFINITY R8 administration commands are listed in the
table below. The command actions that, while active, interfere with daily
maintenance are also indicated. They are the
add
,
change
,
duplicate
,
remove
,
and
set
commands. These commands are frequently used by customer
administrators while performing routine administration of DEFINITY.
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run Full Name of MO
DLY-MTCE MINOR NONE DLY-MTCE
DLY-MTCE MAJOR NONE DLY-MTCE
If Save Fails Then System Raises
Three times in a row MINOR Alarm
Seven times in a row MAJOR Alarm
Table 3-232. DEFINITY Command Actions
Likely to
Disrupt
Less Likely to
Disrupt
add backup ping
change busyout recycle
duplicate clear release
remove display reset
set enable restore
format resume
get save
list status
mark test
Continued on next page