- Planex Communications Inc. PCIBus Adapter User's Manual

GW-DS300N

2.Right click on the AP mode icon, and click “Launch Config Utilities”

to enter the AP mode configuration page. If you want to switch back

to the Station Mode, you may just click “Switch to Station Mode”.

Also you can click “StartƖProgramsƖPlanex WirelessƖPLANEX

Wireless Utility” on the desktop to open the utility.

4.2 ConÀg

After switch GW-DS300N to the AP mode, users can set up the general

settings, encryption, authentication, and so on. If you want to check the

advanced setup and information, please refer to the following chapters.

If you want to configure the general settings, please refer to the following

instructions.

Items Descriptions

Please select the adapter which you’re using now

and then click “Enable ICS”.

The default AP name (SSID) is “SoftAP-XX” (XX

is the last 2 digits of the adapter’s MAC address).

Or you can choose “Use MAC Address” and the

system will automatically copy the NIC MAC

Address to this column and add two characters,“AP”

before the MAC address.

Internet

Connection

Sharing with

SoftAP

SSID