Switch Release Notes

Downloading New Operational Code to the Switch (Layer 2 & Layer 3)
18
-
4 Cajun P550/P220 Switch Operation Guide
Selecting the Image for Reboot
To view and power up the downloaded image from the Web Agent:
1.
In the
Memory Subsystems
section, click
FEPROM Contents
. The FEPROM
dialog box opens.
2.
In the
Power Up/Reset Image
pull-down menu, select the APP location into
which you downloaded version 4.0 and click
APPLY
.
To set the location from which you download the software through the command line,
enter the following command at the system prompt on version 3.0 or 3.1:
fep set <APPname>
where <APPname> is the APP location in flash memory on the switch that contains the
new image.
Resetting the Switch
To reset the switch through the Web Agent after downloading version 4.0:
1.
In the
System Information
section of the Web Agent, click
System Reset
.
2.
In response to the question,
Do you want to reset the switch?
click
Yes
.
The switch resets with the selected version.
To reset the switch through the command line interface after downloading version 4.0:
1.
At the
system
prompt, enter the following command:
reset
2.
In response to the question,
Are you sure you want to continue?
enter
Y
.
The switch resets with the selected version.