Switch Release Notes

Configuring the OSPF Routing Protocol (Layer 3)
9
-
16 Cajun P550/P220 Switch Operation Guide
Sequence Displays the link-state sequence number. The sequence
number is a 32-bit signed integer.
Checksum Displays the checksum of the complete contents of the
advertisement, except the age field.
Age Displays the time (in seconds) of the LSA.
Link ID Displays the neighboring router’s interface ID.
Link Data Displays the interface ID of the associated router interface.
Typ e Displays the link type of Router Network LSAs.
Type s in cl ude:
• Point-to-point Link (1)
•Transit Network (2)
• Stub Network (3)
• Virtual Link (4)
TOS Count Displays the type-of-service count.
TOS 0 Metric Displays the type-of-service cost of the interface.
Network Mask Displays the network mask for the LSA.
External Displays whether the route is connected to an external
network.
This parameter is associated with AS External LSAs.
TOS Displays the type-of-service of the route.
This parameter is associated with AS External, Summary
Network, and Summary AS Border LSAs.
Metric Displays the cost of the link.
This parameter is associated with AS External, Summary
Network, and Summary AS Border LSAs.
Forward Address Displays the forward address. This indicates that packets for
the external destination should be forwarded to the
advertising OSPF router.
This parameter is associated with AS External LSAs.
Tag Displays the tag associated with the LSA.
This parameter is associated with AS External LSAs.
Attached Router ID 1 &2 Displays the router ID for the attached router(s).
Table 9-11. LSA Detail Parameters (Continued)
Parameter Definition