Switch Release Notes

Configuring the RIP Routing Protocol (Layer 3)
8-4 Cajun P550/P220 Switch Operation Guide
To create a trusted RIP neighbor:
1.
In the
RIP Configuration
section of the Web Agent window, click
Trusted RIP
Neighbors
. The Trusted RIP Neighbors dialog box opens.
2.
Click
CREATE
. The Add Trusted RIP Neighbor dialog box opens.
3.
Enter the
Network Address
of the node that acts as the trusted RIP neighbor.
4.
Click
CREATE
to save your changes, or
CANCEL
to restore previous settings.
Interpreting RIP Statistics
To display RIP statistics:
1.
In the
RIP Display
section of the Web Agent window, click
Interface Statistics
.
The Interface Statistics dialog box opens.
2.
Use Table 8-3 to interpret the RIP statistics:
Table 8-3. RIP Statistical Parameters
Parameter Defines the...
Interface Interface associated with the IP address specified.
State Current status of the RIP route. UP indicates that the interface is up and
RIP can transmit and receive updates.
IP Address IP address associated with the interface.
Triggered Updates Sent Number of RIP triggered updates sent.
Non-Triggered Updates
Sent
Number of RIP non-triggered updates sent.
Updates Received Number of RIP updates received based on route changes in the IP routing
table.
Bad Packets Received Number of bad packets received on this interface.
Bad Routes Received Number of bad routes received on this interface.