Switch Router Adapter Owner's Manual

Configuring the SP Switch Router Adapter

Installing the PCMCIA spinning disk

SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 2-9

hold=4

size=1

remove=y

local=y

logfile=/var/portcards/grdump.*

#################################################################

# cleanup our own log file, if necessary.

#################################################################

DEFAULTS

hold=2

local=y

size=10000

logfile=/var/log/grclean.log

The /etc/grclean.logs.conf ﬁle is used to set size limits on log ﬁles. Here are some

sample entries:

*****************************************************************

* Log files that used to be archived by the

*/etc/{daily|weekly|monthly} scripts.

*****************************************************************

size=150000

logfile=/var/log/gr.console

size=11000

logfile=/var/log/gr.boot

7 Save all changes and reboot:

# grwrite -v

# reboot -i

8 Verify that the PCMCIA interface and device are up:

# csconfig -a

Slot 0: flags=0x3<UP,RUNNING>

Attached device: wdc2

Manufacturer Name: "Kingston Technology"

Product Name: "DataPak 520"

Function ID: 4 (PC card ATA)

Assigned IRQ: 11

Assigned I/O port1: 0x3d0-0x3df

Slot 1: flags=0x5<UP,EMPTY>

9 To run a quick test, execute the grconslog command. If the command runs, these steps

have been performed correctly:

# grconslog