Switch Router Adapter Owner's Manual

Introduction to the SP Switch Router Adapter card
SP Switch Router Adapter card specifications
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 1-13
SP Switch Router Adapter card specifications
Refer to Table 1-3 for SP Switch Router Adapter media card characteristics:
Table 1-3. SP Switch Router Adapter media card specifications
Element Value
Attachment density One full-duplex interface
Media transfer rate 100 megabytes per second
Processors 40 MHz SPARC, one transmit, one receive
Data buffers 16MB input, 16MB output
Route table support 150K entries
Max transmission unit The default MTU is 65520 bytes
Card connector 2-row, 50-pin panel-mount receptacle
Cable connector 2-row, 50-pin shielded tab connector
Cables Twisted-pair copper, 10- or 20-meter length, available from IBM
Power consumption Approximately 50 watts per media card