User's Manual

Quick Reference
MDW 9031/9031DCP Wireless Pocket Phone Quick Reference
503-801-1652 Issue 2 February 1999
Handset Display
1
Information you would see on a wired system phone’s display, (except
time), based on your communications system:
LCL:P, D, M1, or M2
= Local Mode:
communications system
WIRELESS TEST
= Handset in Wireless Test Mode
VIBR
= Vibrator enabled
PSEL
= Line Preselection enabled
PRESELECTION:ON/OF
F = Line Preselection Mode:status
CHANGE BUTTN MAP
= Communications system setting is
wrong
MAP:P, D, M1, M2
= Button Mapping Mode: setting
NO LINK
= Handset is not communicating with radio module
2
MSG
indicates that you have a message.
3
RANGE
indicates that the handset is out of range or almost out of range.
Handset also beeps.
4
ON
indicates that handset was turned on by pressing
O
.
5
Battery
icon flashes to indicate a low battery condition. Handset also
emits 2 beeps.
6
No Ring
icon indicates that the alerter is disabled.
7
MUTE
indicates that handset microphone was turned off by pressing
M
.
1
2
8
7
6
9
543
qrtitle.book Page 2 Friday, December 18, 1998 9:52 AM