Instruction Manual

Installation Instructions
3 | P a g e v 1 . 1 ( 02/ 2 0 2 3 )
LIVE WELL DAY NIGHT SLEEP SETTINGS:
This luminaire incorporates 3 light level and colour temperature scenes known as Day, Night & Sleep.
These scenes have been specifically designed to harmonize with your day, improve energy levels and assist your body
in preparing for sleep. Control is via a mechanical or relay ON/OFF switch only. This lamp is not compatible with rotary or
touch button dimmer switches.
Switching cycle:
Switching the luminaire off / on within 1-3 seconds will cycle the lamp through the below pattern.
FIRST SWITCH 2700K 20LM – (Sleep) recommended setting for at least 2 hours before bed.
SECOND SWITCH 2700K 100LM – (Night) recommended setting 6 hours before bed.
THIRD SWITCH 4000K 150LM – (Day) recommended setting at your wake and throughout the bulk of your day.
The luminaire contains a memory feature that activates after remaining on for more than 7 seconds. This will ensure the
luminaire returns to your last active setting. Your new luminaire has been pre-set to the FIRST SWITCH (Sleep) function.
Simply toggle through to reach your desired lighting.
Resetting to Default:
If you have multiple Day Night Sleep LED step lights installed on the one circuit that have become out-of-sync, these can
be returned to the default FIRST SWITCH (Sleep) setting by switching off / on twice immediately (within 1 second).
Clearance Information – AS/NZS 3000:2018 Wiring Rules - Figure 4.9
LOCATION
DISTANCE
DESCRIPTION
HCB
50 mm
(Minimum)
Clearance between the top of the recessed luminaire and
any combustible materials, building elements or objects above it.
SCB
50 mm
(Minimum)
Clearance between the side of the recessed luminaire and
any combustible materials, building elements or objects.
SCI
0 mm
(Abutted)
Insulation can be abutted against the side of the recessed luminaire and covered as per
IC-4 rating. See the IC-4 rating section for more details.
SCG
N/A
Auxiliary equipment/driver/transformer must be placed 100mm away from the luminaire.
It can be placed under the thermal insulation and covered.