Installation Guide

Installation Instructions
5 | P a g e v 1 . 0 p u b l i s h e d o n 0 6 2 0 1 7
Trouble shooting
PROBLEM
POSSIBLE CAUSE
SUGGESTED SOLUTION
Light does not switch
on when there is
movement in the
detection area.
No mains voltage.
Check all connections, fuses,
switches.
Nearby lighting is too bright.
Redirect sensor or relocate the unit.
Controls set incorrectly.
Readjust sensor angle or control knob.
Light switches on for
no apparent reason
(false trigger)
Heat sources such as air-con, Vents, heater
flues, barbecues, other outside lighting,
moving cars are activating sensor.
Adjust direction of sensor head away
from these sources.
Animals, birds, possums, pets etc.
Redirecting sensor head may help.
Reflection from a swimming pool or another
reflective surface.
Redirect sensor.
Light remains on.
Continuously false triggered.
Redirecting sensor head may help.
Time control is set too long.
Reduce time.
Light switches on
during daylight hours.
LUX control knob is set to daylight position.
Turn the LUX control knob to desired
light level setting.
When setting controls
in daylight the
detection distance
becomes shorter.
Interference by sunlight.
Re-test at night.
Safety tips
• Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning or
making any adjustment to the fitting.
• To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the
power.
• Select a suitable location away from liquids and hazards.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
• To clean, wipe with a damp clean cloth. Never soak the fitting with water.
Specifications
SKU #
240727
240728
Colour
Black
White
Rated Voltage
220-240V~ 50Hz
Rated Wattage
12W
LED
4000K, 600lm
Weight
0.61kg
Dimensions
E:190mm W:210mm H:340mm
IP Rating
IP44