Installation Guide

Installation Instructions
5 | P a g e v 1 . 0 (06 / 2 0 2 2 )
Safety Tips
• Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning or
making any adjustment to the luminaire.
• The recessed luminaire must not be used if the diffuser/protective shield has been cracked or damaged.
• The external flexible cable or cord of this recessed luminaire cannot be replaced; if the cable or cord is damaged, the
recessed luminaire shall be destroyed.
• The light source of this recessed luminaire is not replaceable; when the light source reaches its end of life the whole
recessed luminaire shall be replaced. There are no serviceable parts, do not attempt to dismantle or open the product.
• To avoid injury or damage to the recessed luminaire, ensure that power leads and screws are secure before
connecting the power.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp clean cloth. Do NOT soak or immerse the product in water or other liquids.
• Ensure the recessed luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
Specifications
SKU #
170760
170761
170762
170763
Colour
White
Black
Brush Chrome
Brass
Rated Voltage
220-240V~ 50Hz
Rated Wattage
11.5W
LED Specs
Dimmable, Colour Shifting*, CRI﹥90
Rated Lumens
3000K - 900 lumens
4000K - 1050 lumens
5000K - 1000 lumens
3000K - 850 lumens
4000K - 1000 lumens
5000K - 950 lumens
3000K - 850 lumens
4000K - 1000 lumens
5000K - 950 lumens
3000K - 900 lumens
4000K - 1050 lumens
5000K - 1000 lumens
Highly
Recommended
Dimmers
Lucci LEDlux SKU# 290998*, 290997, 299043, 290989, 290992, 290993, 290994
Buster + Punch DIM-002.
Compatible
Dimmers
Clipsal PDL354RDMLED-VW, 31E2RUDM, 32E450TM, 32E450UDM, 32ELEDM.
HPM Cat. 400T
Weight
0.4kg
Cut-out Size
Ø90mm
IP Rating
IP20 for the back of the LED downlight (recessed parts)
IP44 for the front cover of the LED downlight (after installation)
Dimensions
H:63mm Dia:100mm
Driver Model #
LB-PD-2621-11.5W
* NOTE: The colour shifting function will only operate with a mechanical or relay ON/OFF switch.
The colour shifting function will not operate with a semi-conductor ON/OFF switch (e.g. smart switch) or a dimmer with
built in ON/OFF switching function (e.g. smart dimmer). An additional mechanical or relay ON/OFF switch is required on
the same circuit with the semi-conductor ON/OFF switch or the dimmer with ON/OFF switching function with the downlight.