Installation Guide
Installation Instructions
2 | P a g e v 1 . 0
6. Secure the canopy (E) to the mounting bracket (C) by tightening the screws on the side (F).
7. Install the globe (G), (not included) into the lamp holder
8. After the installation, switch on the fitting to test and enjoy your new lighting product.
A
C
B
F
E
D
G
Safety tips
• Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning,
changing the globe or making any adjustment to the fitting.
• To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the power.
• Select a suitable location away from liquids and hazards.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
• To clean, wipe with a damp clean cloth. Never soak the fitting with water.
Specifications
SKU #
011350
011351
011352
Colour
Concrete / Brass
Concrete / Copper
Concrete / Matte Black
Rated Voltage
220-240V~ 50Hz
Rated Wattage
MAX. 45W
Lamp Holder
ES / E27
Weight
0.75kg
Dimensions
H:150mm Dia:55mm Susp:2000mm