Installation instructions

LC4X3WT Wall Mounting Bracket
Lag Screws
1. Raise the monitor with attached brackets to the LC4X3WS Wall Mounting
Bracket and slip the rivets of the LC4X3WS VESA Mounting Plate into the
slots on the LC4X3WS Wall Mounting Bracket.
2. Screw the LC4X3WS Wall Mounting Bracket to the LC4X3WS VESA Mounting
Plate with the provided Machine Screw.
Note: The security screw with a pin head can be substituted for the machine screw
in step 2 for greater security. This screw requires a special socket tool for installation
and removal, SH10ASKT (Sold Separately)
Attaching Monitor to Wall Mounting Bracket
1. After determining the best possible viewing location on the wall,
find the middle of two wood studs in the wall on 16" centers.
2. Use the LC4X3WS Wall Mounting Bracket as a template to mark
the locations for six wood screw pilot holes.
3. Drill the pilot holes using a 1/8" drill bit, 2-3/4" deep.
4. Attach the LC4X3WS Wall Mounting Bracket to the wall using the
six provided Lag Screws.
Attaching Wall Mounting Bracket
Wood Lag Screws are provided for wood stud installations.
For concrete or metal sutds, use the WMAAB6, concrete anchor
bolt kit, or the WMATB6, toggler bolt kit, (sold separately) and
follow the instructions specific to these fasteners.
Attaching Monitor to Wall Mounting Bracket
Security Head or Phillips Head Machine Screw
Slots for Rivets
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677
DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
INSTALLATION INSTRUCTIONS Page 2 of 2
LC4X3WS_Ins (11/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
LC4X3WS Slim Profile Flat Screen Security Wall Mount