SDS

Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com
6
Lucas Deep Clean™ Fuel System Cleaner
Section 8. Exposure controls/personal prote ction
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respiratory protection : Use a properly fitted, air-purifying or supplied air respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Section 9. Physical and chemical properties
Appearanc e
Physical state
Color
Odor
Odor
thresh old
pH
Melting p oint
: Liquid.
[Clear.]
: Straw.
[Light]
: Petroleum solvent
:
Not available.
:
Not available.
: Not available.
Boiling point : 179.44°C (355°F)
Flash point
: Closed cup: 68.33°C (155°F) [Pensky-Martens.]
Burning time : Not applicable.
Burning rate
Evaporation rate
: Not applicable.
: Not available.
Flammability (solid, gas) : Not available.
Lower and upper e xplosi v e
(flammable) lim its
: Not available.
Vapor
pressure
Vapor de nsity
Relative dens ity
Solubi lity
: Not
available.
:
Not available.
: 0.8658
: Negligible at 25
o
C
Solubility in water : Not available.
Partition
coefficient: n-
octanol /w ater
Auto-ignition temperatu re
: Not available.
: Not available.
Decomposition temperature : Not available.
SADT
Viscosi ty
: Not available.
: Kinematic (100°C (212°F)): 0.038 cm
2
/s (3.8 cSt)
Section 10. Stability and reactivity
Reactivity : No specific test data related to reactivity available for this product or its ingredients.
Chemical
stabil ity
: The product is stable.
Possibility of hazardo us
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid : Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition.
Incompatible materials : Reactive or incompatible with the following materials: oxidizing materials.