Material Safety Data Sheet

Page 3 of 7
6. Accidental Release Measures
------------------------------
Methods and Materials
---------------------
If a finely-divided form of product is spilled, clean up spillage so as to
minimize dispersion of dust. Either wet sweeping or vacuuming using HEPA
filtration is recommended.
Personal Precautions
--------------------
Avoid contact with skin, eyes, and mucous membranes.
Environmental Precautions
-------------------------
Prevent spills from entering sewers or contaminating soil.
7. Handling and Storage
-----------------------
Handling Precautions
--------------------
No special handling precautions are required.
Work and Hygiene Practices
--------------------------
To prevent ingestion following use of the product, wash hands and face before
eating, drinking, applying cosmetics, or using tobacco. Remove contaminated
clothing or protective equipment before entering eating/drinking areas.
Storage Precautions
-------------------
Do not store in proximity to incompatible materials (see Section #10).
8. Exposure Controls and Personal Protection
--------------------------------------------
Ingredients - Exposure Limits
-----------------------------
Copper
ACGIH TLVs: 0.2 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and mists)
OSHA PELs: 0.1 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and mists)
Phosphorus
No applicable ACGIH TLV(s) No applicable OSHA PEL(s)
Silver
ACGIH TLV: 0.1 mg/m3 TWA (metal) OSHA PEL: 0.01 mg/m3 TWA
Ingredients – Biological Limits
-------------------------------
Copper
No ACGIH BEI(s) or other biological limit(s)
Phosphorus
No ACGIH BEI(s) or other biological limit(s)
Silver
No ACGIH BEI(s) or other biological limit(s)
Engineering Controls
--------------------
Use dilution or local exhaust ventilation adequate to maintain concentrations
of all components and their byproducts to within their applicable standards.