DVR User Manual For H.
Digital Video Recorder User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
Digital Video Recorder User Manual Table of Contents 1 Introduction ..................................................................................................................................................... 1 1.1 DVR Introduction .....................................................................................................................................................................1 1.2 Main Features......................................................................................
Digital Video Recorder User Manual 4.2 Live configuration .................................................................................................................................................................. 17 4.2.1 Live ............................................................................................................................................................................................................... 17 4.2.2 Main monitor ...............................................
Digital Video Recorder User Manual 4.7 User management configuration............................................................................................................................................ 39 4.8 P.T.Z configuration ................................................................................................................................................................. 40 4.9 Reset .....................................................................................................
Digital Video Recorder User Manual 7.4 Remote playback & backup ................................................................................................................................................... 60 7.4.1 Remote playback ........................................................................................................................................................................................... 60 7.4.2 Remote backup.................................................................
Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model DVR (Digital Video Recorder) is designed specially for CCTV system. It adopts high performance video processing chips and embedded Linux system. Meanwhile, it utilizes many most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
Digital Video Recorder User Manual BACKUP • Support USB 2.0 devices to backup • Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 128MB for every video file packaging 4/8 audio channels available Three record search mode: time search, event search and image search.
Digital Video Recorder User Manual SECURITY • Customize user right: log search, system setup, two way audio, file management, disk management, remote login, live view, manual record, playback, PTZ control and remote live view • Support 1 administrator and 63 users. • Support event log recording and checking, events unlimited NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream.
Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive &DVD Writer 2.1.1 Install Hard Drive Notice: 1. this series support two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate HDD capacity according to the recording setting.
Digital Video Recorder User Manual 2.2 Front Panel Descriptions Notice: The front panel descriptions are only for reference; please make the object as the standard. Type Icon Name Item Description REC MENU/+ BACKUP/1 Compound button SEARCH PLAY /PAUSE FF REW STOP/ESC 2 Input button Direction button Multi-screen Enter button USB 3 4 USB port POWER POWER Record manually 1. Enter menu in live 2. Increase the value in setup 1. Decrease the value in setup 2.
Digital Video Recorder User Manual 2.3 Rear Panel Instructions 2.3.1 Rear Panel Interface The rear Panel interface for 4-ch is shown as Fig 2.3: Fig 2.3 Rear Panel for 4-ch Item Name 1 2 3 4 5 6 7 8 9 10 11 Audio in Video in Audio out Video out P/Z K/B ALARM OUT + 5V and GND ALARM IN VGA port LAN 12 USB port 13 DC12V Description 4 CH Audio input Video input channels from 1-4 Audio output, connect to the sound box Connect to monitor Connect to speed dome Connect to keyboard 1-ch relay output.
Digital Video Recorder User Manual The rear Panel interface for 8-ch is shown as Fig 2.4: Fig 2.4 Rear Panel for 8-ch Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Name Audio in Video in Audio out Video out P/Z K/B ALARM OUT + 5V and GND ALARM IN VGA port LAN USB port DC12V Description 4 CH Audio input Video input channels from 1-8 Audio output, connect to the sound box Connect to monitor Connect to speed dome Connect to keyboard 1-ch relay output.
Digital Video Recorder User Manual 2.4 Remote Controller It uses two AAA size batteries and works after loading batteries as following: Step1: Open the battery cover of the Remote Controller Step2: Place batteries. Please take care the poles (+ and -) Step3: Replace the battery cover Notice: Frequently defect checking as following 1. Check batteries poles 2. Check the remaining charge in the batteries 3.
Digital Video Recorder User Manual Item Name 3 4 5 6 7 8 9 10 11 12 13 14 REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button BACKUP Button 15 PTZ Control Button Function To record manually Input digital or choose camera To choose multi screen display mode To enter search mode To enter menu To confirm the choice or setup Move cursor in setup or pan/title PTZ To increase or decrease the v
Digital Video Recorder User Manual 2.5 Control with Mouse 2.5.1 Connect Mouse It supports USB mouse through the ports on the rear panel. Notice: If mouse is not detected or doesn't work, check below steps: 1. Make sure the mouse plugs in the USB mouse port not the USB port 2. Change a mouse to try 2.5.2 Use Mouse In live: Double-click left button on one camera to be full screen display. Double-click again to return to the previous screen display.
Digital Video Recorder User Manual 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.
Digital Video Recorder User Manual 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456” The concrete operation steps for change password, add or delete user please refer to Fig 4.7 User management configuration for more details. 3.
Digital Video Recorder User Manual 3.3.1 Live playback Click Play button to playback the record. Refer to Figure3-3. User can do concrete operation by click the buttons on screen.
Digital Video Recorder User Manual 4 Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Fig 4-1 main menu toolbar Click the icon beside the screen display mode to display a channel select dialog. 6/8 channels can realize single channel big screen. Images can drag to any place to display in the live interface.
Digital Video Recorder User Manual controller also can display the main menu. Click Setup icon will pop-up configuration menu: Fig 4-2 system setup 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.1 System Step1: enter into system configuration basic configuration system; refer to Fig 4-3: Step2: in this interface user can setup the device name, device ID, video format, max network users, VGA resolution and language.
Digital Video Recorder User Manual Show wizard: tick off this item, there will display an opening wizard with time zone and time setup information Max network uses: set the max user amount of network connection VGA resolution: the resolution of live display interface, range from: VGA800*600、VGA1024*768、VGA1280*1024and CVBS Note： When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor. Language: setup the menu language.
Digital Video Recorder User Manual Fig 4-5 basic configuration-DST 4.2 Live configuration Live configuration includes four submenus: live, host monitor, spot and mask. 4.2.1 Live In this interface, user can setup camera name, adjust colors: brightness, hue, saturation and contrast. Step1: enter into system configuration live configuration live; refer to Fig 4-6: Note: Click Camera Name to display a soft keyboard. User can self-define the camera name.
Digital Video Recorder User Manual Fig 4-6 live configuration live Fig 4-7 live-color adjustment Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort default setting, click “OK” button to save the setting. Step4: user can setup all channels with same parameters. Tick off “all” to do relevant setup.
Digital Video Recorder User Manual Step2: select split mode: 1×1、2×2、2×3、3×3 and channel. Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display Step4: select the split mode and then setup current picture group. Click button to setup the previous channel groups of dwell picture. Click button to set the latter channel groups of dwell picture.
Digital Video Recorder User Manual 4.2.4 Mask User can setup private mask area on the live image picture, max threes areas. Fig 4-10 live configuration-mask Setup mask area: click Setting button to enter into live image. Press left mouse and drag mouse to set mask area referring to below picture. Click Apply button to save the setting. Delete mask area: select a certain mask area and click left mouse to delete that mask area. Then click Apply button to save the setting.
Digital Video Recorder User Manual 4.3 Record configuration Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap. 4.3.1 Enable Step1: enter into system configuration record configuration enable; refer to Fig 4-11: Parameter Record Audio Meaning Record switch of every channels Enable live record audio Fig 4-11 record configuration-enable Step2: select record, audio and record time. Step3: user can setup all channels with same parameters.
Digital Video Recorder User Manual Parameter Resolution fps Quality Meaning Support CIF Range from 1-30（NTSC）1-25(PAL) The higher the value is, the clearer the Recorded image is. Six options: lowest, lower, low, medium, higher and highest. Fig 4-12 record configuration-record bit rate 4.3.3 Time Step1: enter into system configuration record configuration time; refer to Fig 4-13: Pre-alarm record time: the record time before event happen i.e.
Digital Video Recorder User Manual Fig 4-13 record configuration-time 4.3.4 Stamp Stamp：User can overlap the channel name and time stamp on video.
Digital Video Recorder User Manual stamp in random positions. Please refer to below Figures: Before drag after drag Step3: user can also setup all channels with same parameters. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.5 Recycle record Step1: enter into system configuration record configuration recycle record; Step2: tick off recycle record to enable the recycle record function.
Digital Video Recorder User Manual 4.4.1 Schedule The volume means the seven days of a week from Monday to Sunday; the row means 24 hours of a day. Click the grid to do relevant setup. Blue means checked area, gray means unchecked area. Step1: enter into system configuration schedule configuration schedule; refer to Fig 4-15: Fig 4-15 schedule configuration-schedule Step2: select channel, double-click and a dialog box will pop-up as Fig 4-16.
Digital Video Recorder User Manual 4.4.2 Motion Step1: enter into system configuration schedule configuration motion; refer to Fig 4-17: Step2: the setup steps of motion are familiar with schedule; user can refer to 4.4.1 Schedule for details. Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.4.
Digital Video Recorder User Manual Step2: the setup steps of alarm are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5 Alarm configuration Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out. 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule.
Digital Video Recorder User Manual Fig 4-20 alarm configuration-sensor-alarm handling Fig 4-21 alarm handling-trigger Step3: After selecting Buzzer, there will be triggered buzzer alarm out; Full screen alarm: when triggered alarm, there will pop up full screen alarm; Email: tick of this function. When an alarm trigged, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. Snap: Select channels.
Digital Video Recorder User Manual Fig 4-22 sensor-schedule Step2: the setup steps of sensor schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5.2 Motion Motion includes two sub menus: motion and schedule. ① Motion Step1: enter into system configuration alarm configuration motion.
Digital Video Recorder User Manual Step3: the setup steps of motion trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step4: click Area button to pop-up a window as Fig 4-24: Fig 4-24 motion-area Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8). The default value is 4. The higher the value is the higher sensitivity you get.
Digital Video Recorder User Manual Step1: enter into system configuration alarm configuration schedule; refer to Fig 4-25: Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details. 4.5.3 Video loss Step1: enter into system configuration alarm configuration video loss; refer to Fig 4-26: Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details.
Digital Video Recorder User Manual Disk Warning: if the disk reduces, the system will send email to the designated mailbox or alarm to notify the reducing information after the user has selected the corresponding function. Step2: the setup steps of Buzzer, Email, To Alarm Out are familiar with alarm handling. User can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step 3: select a hard disk in the pull down list box.
Digital Video Recorder User Manual Fig 4-28 system configuration-alarm out ③ Buzzer Step1: enter into system configuration buzzer; Step2: tick off Buzzer and set buzzer alarm hold time 4.6 Network configuration Network configuration includes four submenus: network, sub stream, Email and other settings. 4.6.1 Network Step1: enter into system configuration network configuration network; refer to Fig4-29: Step2: HTTP port: the default value is 80.
Digital Video Recorder User Manual 4.6.2 Sub stream Step1: enter into system configuration network configuration sub stream; refer to Fig 4-30: Step2: select fps and quality. Step3: user can also setup all channels with same parameters. Step4: click “apply” button to save the setting; click “exit” button to exit current interface. Parameter FPS Resolution Quality Meaning Range from: 1-25 Support CIF The higher the value is, the clearer the record image.
Digital Video Recorder User Manual (SSL)”, user can setup mail servers (such as Gmail) according to actual needs. Send address/password: sender’s email address/password Receive address: receiver’s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox. Attaching image: After selecting it, the system will attach images when sending the emails. Fig 4-31 network configuration-email . 4.6.
Digital Video Recorder User Manual Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line for the server. After the successful apply, user can access the server from the IE client by inputting that domain name.
Digital Video Recorder User Manual operation: Click “Tools”-- “Folder options” Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1． Domain name Registration （Take www.dyndns.com for example） Note: Users can self-define the hostname, username and password. Input www.dyndns.com in the IE address bar, user can access the domain name registration interface. Click” ” ”Create Free Hostname” to register. For example: Hostname is “abc.dyndns.tv.
Digital Video Recorder User Manual Click” Create Account” button to create user account. 2． DVR Setting （1） Domain name According to the domain name registration of “DDNS”， the domain name for DVR is “www. abc.dyndns.tv” （2） Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3． Application Connect DVR to the Network Client.
Digital Video Recorder User Manual DDNS server User name Password Host domain Update interval DDNS server Website provided by dynamic domain name supplier. The optional: www.dns2p.net ， www.meibu.com ， www.dyndns.comandwww.no-ip.com User name for log in the website of domain name supplier Password for log in the website of domain name supplier The domain name user registered at the supplier’s website. The interval time of upgrading DVR IP address 4.
Digital Video Recorder User Manual ② Authority: Step1: enter into Add user authority referring to Fig 4-35: Step2: In the authority interface, assign the definite operation right for that user. Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address. Step4: select the user that user wants to delete in the user list box and then click Delete button to delete this user.
Digital Video Recorder User Manual Fig 4-36 P.T.Z configuration-serial port Step2: tick off Enable and setup the value of address, baud rate and protocol according to the settings of the speed dome. Step3: user can also setup all channels with same parameters. Step4: click “apply” button to save the setting; click “exit” button to exit current interface. Definitions and descriptions of network stream: Parameter Meaning Address The address of the PTZ device Baud rate Baud rate of the PTZ device.
Digital Video Recorder User Manual Fig 4-37 P.T.Z configuration-advance Step2: in the Advance interface, after clicking preset “Setting” button, a dialog box will pop-up as Fig 4-38: Fig 4-38 advance-preset setting a. in the preset set interface, click Setting button to see a window as Fig 3-39: Fig 4-39 preset set-setting b.
Digital Video Recorder User Manual PTZ light. Note: PTZ must support wiper and light, these two functional buttons can take effect. At the same time these two buttons are just available when selecting PELCOP or PELCOD. Click Save button to save the settings; click icon to hide the tool bar, right-key can remerge it; click current interface. d. in the preset interface, click OK button to save the setting; click Exit button to exit current interface.
Digital Video Recorder User Manual b. click Add icon to set the speed and time of preset point; select a preset point and click Delete icon to delete that preset point; click Modify icon to modify the setting of a preset point. User can click those icons to adjust the position of preset point. Click Preview button to preview the cruise line and then click OK button to save the setting. Next, click Exit button to exit current interface. c.
Digital Video Recorder User Manual 5 Record search & playback and backup Search configuration includes four submenus: time search, event search, file management and image. 5.1 Time search Step1: enter into Search configuration time search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: select channel, screen display mode, the highlight date in the calendar means have record data Step3: select a date and press Search button.
Digital Video Recorder User Manual Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button. Click this button to expand the whole interface. 5.2 Event search Step1: enter into Search configuration event search referring to Fig 5-2: Fig 5-2 Search configuration-event search Step2: After clicking Search button, the searched event information will displayed in the event list box. User can select date, channel.
Digital Video Recorder User Manual 5.3 File management Step1: enter into Search configuration file management; refer to Fig 5-3: Fig 5-3 Search configuration-file management Step2: When clicking Search button, the searched files will be displayed in the file list box; user can select date, channels accordingly. Lock: select a file and click Lock button to lock this file, after that, that file will not be deleted or covered.
Digital Video Recorder User Manual 2000 images, those additional images will supersede prior images. Double click the image with the left mouse to automatically playback from the time of the image captured. 5.5 Backup This unit supports backup by USB Flash. User can also make backup by IE browser via internet. Refer to 7.3.2 Remote backup.
Digital Video Recorder User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to set date. Note: if there are overlapping files, a “+” character will show behind the channel ID. 6.1.
Digital Video Recorder User Manual 6.2 Disk management 1. Format the disk Step1: enter into disk management interface Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space, and total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save the setting Step3: select a hard disk and click Format button to star format.
Digital Video Recorder User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR’s Main Menu Setup Network interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
Digital Video Recorder User Manual Step 5: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address or domain name. Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8. 2. Connect the DVR to internet directly.
Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”. Second: Select Applications Right click “Safari. App” Select “Get Info”.
Digital Video Recorder User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Preferences” ”Internet &Wireless” click “Network” icon. The following window will pop up.
Digital Video Recorder User Manual Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC. Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main Menu Setup Network interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router.
Digital Video Recorder User Manual Step 5: Click icon and then select the Active X control, the welcome interface will be shown. Click “Continue” ”Install” button，the following window will pop up： Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser.
Digital Video Recorder User Manual 7.
Digital Video Recorder User Manual Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel DVR for example: user can tick off channels form 1-ch to 8-ch at random to display the live pictures, 6 channels can be selected at most. Then click OK button to confirm the setting.
Digital Video Recorder User Manual Center, adjust rotation speed, Iris and zoom, focus on the dome, and set the presets, etc. Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down. means the dome rotate left. means the dome rotate right. means the dome stop rotating. Drag the scroll bar to adjust rotating speed of the dome. 'Iris' button.
Digital Video Recorder User Manual Click the right mouse on the live interface, a pull-down menu will appear as below Fig 7-4 right key sub menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS（PAL）/30 FPS （NTSC）for every channel, but it needs higher network bandwidth simultaneously; Sub-stream has low frame rate, max 6FPS （PAL）/7FPS（NTSC） for every channel, it requires low network bandwidth.
Digital Video Recorder User Manual picture. Fig 7-5 Play record file interface This DVR supports remote time search, event search and file management.
Digital Video Recorder User Manual Fig 7-6 time search interface Step2: click “Search” button.
Digital Video Recorder User Manual Fig 7-7 Time search playback By Event Search: Step1: Enter into Search event search; refer to Fig 7-8: 63
Digital Video Recorder User Manual Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor. Click “search” button Step3: the events will be display in the event list box.
Digital Video Recorder User Manual Fig 7-9 file management interface Lock: select certain file item in the file list box and click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file and click “unlock” button to unlock this file Delete: select an unlock file and click “delete” button to delete this file from file list 7.4.
Digital Video Recorder User Manual Fig 7-10 remote backup interface Step1: select channels, set the start and end time and then click “search’ button to display the file information in the file list box Step2: select backup files, click “browse” button to set the save path, and then click “backup” button to start backup. The backup files will be saved on user’s PC. 7.5 Remote System Configuration User can remote setup the parameters of the device.
Digital Video Recorder User Manual user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters. When one user setup parameters of a certain item, others cannot setup this one. Click Config to enter into the below interface refer to Fig 7-11: Fig 7-11 remote menu setup The sub menu lists and the options in every item are similar with those on the DVR. Please refer to Chapter 3 Main Menu Setup Guide for more details.
Digital Video Recorder User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone，blackberry or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
Digital Video Recorder User Manual Step5：Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Refer below picture in the left: Step6：Camera 1 is the default channel after login. Change the channel in rolling-down menu of “Channel”: refer below picture in the right: Notice: User name and password here are the same with that used on the DVR.
Digital Video Recorder User Manual Step1：Firstly enable the network access on mobile phone. Then run Web browser. Step2：Input the DVR server’s IP address in a new-built bookmark. Click this bookmark to connect to the DVR. Step3：A welcome window will pop up and requires a package. Click the software name to download. Step4：A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5：A Scam shortcut icon appears on the system menu after finished.
Digital Video Recorder User Manual Step8：Input the server’s address, ID and password respectively. Then save. Notice: About Access point, there may be different access points in different countries or from service providers. Step9：Enter Live View, it will connect the server and display pictures. Refer picture in the left: Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. Step10：In Live View, users can do snapshot, change channels and control PTZ.
Digital Video Recorder User Manual Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” 72
Digital Video Recorder User Manual Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one. 2. Install through PC.
Digital Video Recorder User Manual Step 1: Install iTunes store in PC and then login Step 3: Enable “search” Step 2: Connect iPhone and PC function to search “SuperCam” Step 4: Click “free application” button Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button 74
Digital Video Recorder User Manual Operation Instruction for SuperCam 2.12(iphone) 1. Login interface Enter server’s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
Digital Video Recorder User Manual 3.
Digital Video Recorder User Manual Group H-Reverse Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Preset elect the preset point Set the cruise line Speed Rotate speed of the PTZ Horizontal- Reverse 4. Image view interface 5.
Digital Video Recorder User Manual Click the record file to playback. 6.
Digital Video Recorder User Manual 7. Config interface Main parameters for mobile phone video config Record file clip size: Single video size.
Digital Video Recorder User Manual 8.
Digital Video Recorder User Manual Step 3: press “Install” button Step 4: click “OK” button Step 5: user can view the download and install process in notifications; finished download, the software will install automatically.
Digital Video Recorder User Manual Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual （Fig 2） ( Fig 1） Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ 83
Digital Video Recorder User Manual Stop rotates the PTZ Zoom Out/Focus Out/Iris Sub Group Zoom In/Focus In/Iris Add Preset Select the preset point Set the cruise line Image view Previous Next Zoom out Delete Zoom in Return to main menu Record playback Play/pause Full screen stop Return to record file interface (Fig 3) （Fig 3） （Fig 4） Click the record file (Fig 3) to playback (Fig 4) 84
Digital Video Recorder User Manual Server list Config interface 85
Digital Video Recorder User Manual Alarm setting Tick off Sound Alarm Alarm，when Video Loss/Sensor/Motion happen，trigger happen sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen happen，trigger vibrate alarm Storage setting Path Reserved disk space Video clip size Remove all recorder files before User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Save path for mobile video files, the default catalog is /SDCard/.
Digital Video Recorder User Manual 8.5 Installation and operation Methods for BlackBerry Mobile phone Client 8.5.1 Installation instruction for BlackBerry Mobile phone Client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown. 4. Finished downloading, the software will be installed automatically.
Digital Video Recorder User Manual Note: ote: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. 1) Enter into Menu->Option->Browser >Browser Configuration; configure referring to the following figure. 2) Enter into Menu->Option->Cache >Cache Operations, clear up browser cache.
Digital Video Recorder User Manual 8.5.2 Operation peration method for Blackberry mobile phone client 1. Login Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
Digital Video Recorder User Manual 3.
Digital Video Recorder User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background Preset Mark 2 alarm Stop rotating the PTZ Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Select the preset point 4. Server list 5.
Digital Video Recorder User Manual 6.
Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
Digital Video Recorder User Manual a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c. The mouse is incompatible.
Digital Video Recorder User Manual Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait9”all the time First possible reason: hard-disk cable and data cable are not well connected.
Digital Video Recorder User Manual Q11: What are the minimum configurations of PC for clients connecting? PC Module Parameters CPU Intel Celeron 2.4G Motherboard Intel 845 HDD 80G RAM 512M VGA NVIDIA GeForce MX440/FX5200; ATIRADEON 7500/X300 OS Windows 2000(SP4 above) /Windows XP(SP2 above) /VISTA DirectX 9.0 Q12: How to handle the situation when codec Control is blocked to install in the VISTA or Win7 system? If user gets this problem, may have two ways to fix it: a.
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.
Digital Video Recorder User Manual Appendix C 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Compatible Devices Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB 2. Compatible HDD list Brand Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS Seagate SV35.3 ST31000340SV Seagate Pipeline HD.2 Seagate Barracuda 7200.10 Seagate Barracuda 7200.10 ST3250310AS Seagate Barracuda 7200.11 ST3160813AS Seagate Barracuda 7200.
Digital Video Recorder User Manual Appendix D 4-CH Specifications Compression format Video output Standard H.264 Baseline Video input VGA Resolution Record Resolution Composite：1.
Digital Video Recorder User Manual Appendix E 8-CH Specifications Compression format Video output Standard H.264 Baseline Video input VGA Resolution Record Resolution Composite：1.
