Owner's manual

2.2.3.7 SYSTEM MAINTAIN

Use the System maintain menu to update system firmware and set an automatic system

reset schedule.

To enable auto-reset:

1） Under AUTO RESET, select ON. The Settings option appears.

2） Under SETTINGS, select EVERY DAY, EVERY WEEK, or EVERY MONTH. The date

drop-down menu appears.

3） Select the date for auto-reset from the drop-down menu.

4） Enter the time for auto-reset using the Virtual Keyboard (mouse only).

5) Click APPLY. Click CLOSE in the confirmation window

To restore factory settings:

1） Click LOAD DEFAULT. This will restore the system to the original factory settings.

2） Click OK in the prompt.

To reboot:

1） Click REBOOT.

2） Click OK in the prompt.

To standby:

1） Click STANDBY.

2） Click OK in the prompt.

NOTE: Recorded video on the HDD will not be erased.

To restart the machine (soft-reset):

1） Click RESTART.

2） Click OK in the prompt. The system will perform a soft-reset and load to a live split-screen

view.

To upgrade firmware:

1） Copy the firmware file to an empty USB flash drive. The firmware file should not be in a

folder.

2） Connect the USB flash drive to the top USB port on the front panel of your system.

3） Open the System Menu (Main Menu>Advance>System).

4） Click FIRMWARE UPDATE. The system will scan the USB flash drive and begin updating

the firmware. Do not remove the USB flash drive while the upgrade is taking place.