Owner's manual

2.2.3.6 MOTION DETECT

Configure motion detection for each channel.

To configure motion detection:

1) Under STATUS, select ON to enable motion detection for the desired channel. Click

NEXT PAGE for additional channels (8-channel models only).

2) Under SENSITIVITY, select 1, 2, 3, or 4. The higher the number, the more sensitive the

motion detection.

3） Under MD SETUP, click SETUP. The red motion grid appears over the selected channel

in full screen.

4) Click the blocks in the grid to enable/disable motion detection. Red=motion detection

enabled; Clear=motion detection disabled.

5） Right-click anywhere on the screen to return to the Motion Detection menu.

6） Click APPLY. Click CLOSE in the confirmation window.

7） Click EXIT in all menus until all windows are closed.

NOTE: You can disable the MD buzzer in the Alarm Setup menu.