H.
CONTENT 1.1 PREODUCT INTRODUCE...................................................................................................................3 1.2 PRODUCT FEATURE ..........................................................................................................................3 1.2.1 SPECIFICATION..............................................................................................................................3 1.2.2 BASIC WORKING PARAMETER ............................................
INTRODUCTION 1.1 PREODUCT INTRODUCE DVR-8316 is developed base on new platform. 8316 is 16 channel CIF resolution digital video recording DVR, which have local recording, playback, support triple code remote network surveillance, data backup, parameter setting, motion detection, I/O alarm setting, PTZ and USB mouse, USB2.0 backup, IE browser and back up. 1.2 PRODUCT FEATURE H.264 compression Two USB interface, USB2.0 for data backup, USB1.1 for mouse operation. 2 pcses 3.5” SATA HDD at most.
Record style Audio video recorded simultaneously Audio compression Picture compression H.
1.2.2 BASIC WORKING PARAMETER item parameter remark Voltage input 19V DC 19V. Video impedance input 75Ω 75Ωeach channel. Video output 1Vp-p I/O 1Vp-p CVBS signal 0—2V Low voltage alarm 5V-30v High voltage alarm RS232 serial port, for extend use RS485 Connect to PTZ, (Pelco-D,Pelco-P) SATA HDD 2 SATA with all capability 1.
2 DEVICE OPERATION In device operation, the enter key on remote control has the same function with mouse left click. 2.1 REMOTE KEY INSTRUCTION 2.1.1 REMOTE CONTROL Handheld IR Controller Key Functions: 【0－9】keys: During setup, number keys are used to input values.
respectively. 【＋】,【－】keys: During setup, plus and minus are used to select next or previous values. : Up, Down directional keys: Move selection up and down in setup menu. ▲, , : Left, Right directional keys: Move cursor left or right in setup menu. 【OK】: During setup, select and save entry During Playback and preview, displays the channel name, text number, driver name, event sensor item and time, year/month/date, time, GPRS/GPS info on the screen.
2.1.2 MOUSE OPERATION You can use mouse to make operation of the menu except IR remote controller. (The operation usage is the same as PC Windows).Please inserts the mouse into USB1.1. Enter into main menu: Click the right key on the live view. Click right key Exit the present menu: It won’t save the settings if you click the right key to exit. Exit the playback interface: Click the right key to exit when you are playback. Click the left key to enter into the setting interface.
Click left or right key 1. In the input frame, click the left key or right key can activate the keyboard. Click the right key can make the switch of Chinese and English on the soft keyboard. The number, symbol, English can be input by clicking the mouse. 2. Pinyin also can be input by the soft keyboard when enter Chinese, the method is the same as IR remote controller. You can use the left/right key to turn over the page when check on Pinyin/Chinese word. 3.
2.1.3 MENU TREE You can control the DVR by a lot of menu operation. This tree will show you the menu structure and it will be in details in after chapter.
2.2 SYSTEM OPERSTION 2.2.1 USER LOGIN 1. START-UP Connect the DC19V/3A adapter to DVR. When start up the DVR, 【POW】LED will be on and 16 images will be display on the screen. If it has setup ignition recording or time recording, the system will record automatically and the corresponding LED will be on, the system work normally. Remark: If there is no HDD in device, or device didn`t read the new HDD, it will display an 【H】 in live view, so please format it when connect a HDD for the first time. 2.
2.2.2 GUI OPERATION The main menu include “CAMERA”,”RECORD”,”NETWORK”,”SEARCH”,“DEVICES”,and“SYSTEM”. Remark: You must after pressing “APPLY” to make the setting for submenu valid. It will no use when exit directly. This DVR have a special feature is: when you move the mouse to everywhere, there will have the explanation information showed auto. 2.2.2.1 CAMERA Move the cursor to【CAMERA】（Icon highlighted when selected）, press【Enter】to enter into the setting interface.
CH1~CH4: you can select the CH1~CH4, CH5~CH8, CH9~CH12, CH13~CH16 here. NAME: press【Enter】to enter into the setting interface. POSITION: press【Enter】 to switch name location, there are 5 options: Bottom left, top left, bottom right, top right and OFF. COLOR: press【Enter】to enter into setting interface, as following: Press【Enter】or【+】【-】key or directly drag the cursor to set colors, including chroma, brightness, contrast and saturation, press【APPLY】to save the parameters.
CH1~CH4: you can select the CH1~CH4, CH5~CH8, CH9~CH12, CH13~CH16 here. RECORD: ON: Means the channel enable for recording. QUALITY: There are BEST, FINE ANDNORMAL three options, corresponding HIGHEST, HINGAND NORMAL data stream standard AUDIO: ON: Means enable the audio recording for all channels, OFF: Means disable audio recording REC.MODE: POWER UP: Means the device will start recording when it startup. TIME: Recording as the schedule, you can setup the schedule as you want as follow.
other days. Different color means different record mode: Red means alarm record, green means normal record, grounding means no record. PACK TIME: There are 15min, 30min, 45min, 60min four options, that means it will pack as the mode you selected Scroll to APPLY and press ENTER to save the new settings. 2.2.2.3 NETWORK SETUP Move the cursor to [NETWORK SETUP] (icon highlighted when selected), and press 【Enter】 to enter into setting interface . TYPE: There are PPPOE, DHCP & Static three options.
● DHCP Select the DHCP, and enter into the interface as followings. PORT: the communicate port between PC and DVR, recommend use default port. WEB PORT: setup the port of IE browser via HTTP. Remark: when you setup the net mode as DHCP, the router will arrange a dynamic IP for DVR. ● PPPOE Select the PPPOE, and enter the interface as followings MEDIA PORT: the communicate port between PC and DVR, recommend use default port WEB PORT: setup the port of IE browser via HTTP.
DDNS: There are [ON/OFF], and if there is a DDNS service, please setup it as ON. SERVICE: There are 3 services to select, 3322, dyndns, and perfecteyes. HOST NAME: Input the name of the host server. USERNAME: Input in the name of the user. PASSWORD: Input the password for DDNS. 2.2.2.4 SEARCH Move the cursor to 【SEARCH】（Icon highlighted when selected）,press【Enter】to enter into the setting interface.
search the recording status of that day, the searching result will be showed in the below date frame. 2. DAY: It will show all the recording status in this day, you can playback the record file in this period via click the corresponding period. PLAY: You can press 【Enter】 input number directly to setup playback time. After setting, move the cursor to “PLAYBACK”, and then press”APLLY”to enter into video playback of that time.
Then you can select four channels as you want to playback, because 16CH DVR support 4channels playback at the same time. Instruction: 1. 【FILE LIST】,“CHANNEL”is the recording file which belong to which channel, “SIZE” is display the size of this file（Unit:MB）, “TYPE” is display the type of recording file, there are two types: normal and alarm,press“BACKUP”button can export the selected files to USB storage; 2.
INFO: means the alarm type. TRIGGER: means the alarm triggered time. VIDEO: means whether the log has corresponding video file. 3. BACKUP You can use USB for backup, should insert USB device into the USB2.0 port before backup files. And it is support USB OTG.
2.2.3 DEVICES SETUP Move the cursor to【DEVICES SETUP】（Icon highlighted when selected）,press【Enter】 to enter into setting interface. Advanced Features include HDD, ALARM, PTZ, MOBILE and MOTION DETECT. 2.2.3.1 HDD MANAGE Move the cursor to 【HDD】（Icon highlighted when selected）,press【Enter】to enter into the setting interface, and you can use direction keys and cursor to change the options. HDD STATUS: There status is ok means the HDD is ok.
space less than 500M it will stop recording, and an prompt will display in live view “please shutdown and replace HDD” HDD FORMAT: Move cursor there to select device and press【APLLY】 to start formatting. U DISK FORMAT: format the external thumble drive. 2.2.3.2 ALARM SETUP Move the cursor to【ALARM SETUP】（Icon highlighted when selected）,press【Enter】to enter into setting interface. CH1~CH4: you can select the CH1~CH4, CH5~CH8, CH9~CH12, CH13~CH16 here.
into setting interface, you can setup the parameters for each channel separately. CH1~CH4: you can select the CH1~CH4, CH5~CH8, CH9~CH12, CH13~CH16 here. PROTOCOL: select the protocol of different PTZ, there are two protocols to switch, and the default is Pelco-D BAUD RATE: select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600 DATA BIT: there are 5,6,7,8 options to select, default setting is 8. STOP BIT: there are 1and 2 to select, the default setting is 1.
2.2.3.5 MOBILE Move the cursor to【MOBLE】（Icon highlighted when selected）,press【Enter】to enter into setting interface. CHANNEL SELECTION: select the channel for mobile view, and press [Enter] to switch different channels. MOBLESS LAN: Select different mobile network from the options of 3G, 2.5G and 2.75G, and press [Enter] to switch different network. PORT: the port for mobile view, you should open the port in the router for mobile view. 2.2.3.
SNESITIVITY:Each channel has corresponding sensitivity setting, including four standards high,higher,medium and low, press【Enter】key to switch MD AREA: each channel has corresponding regional motion detecting setting, move the cursor to corresponding 【setting】,press【Enter】to enter regional setting interface, red area means it have activated motion detection, transparent block means it have not activated motion detection.
AUTO MAINTAIN: When switch is on, you can setup the time for device to restart. SYSTEM UPDATE: Copy the update file to the dvrupgrade folder in the root directory of the thumb driver, and insert it into USB 1.0, then press [Enter] to upgrade the firmware, and it will display the process of the system upgrading, as following: LOAD DEFAULT: Restore all the settings as the factory setting. REBOOT: means restart the device. 2.2.3.
2.2.4 SYSTEM SETUP Move cursor to select “SYSTEM SETUP” (The big icon means selected)and press【ENTER】 to enter into the system language setup interface. System setups include time/date, password, video/audio, language, info and maintain six options. 2.2.4.1 DATE/TIME SETUP Move cursor to select “date/time” (icon highlighted when selected)and press【ENTER】to enter into the date/time setup interface. DATE: Setup system date via numeric key.
TIME: Setup system time via numeric key. TIME FORMAT: Press ENTER to switch between the date patterns, there are 12 HOURS and 24 HOURS two options. Remark: You must move the cursor to the 【MODIFY TIME AND DATE】 and press 【APPLY】 to save it, otherwise it won’t save the modify if you exit this interface. DST: DST settings, you can setup DST as you want here. 2.2.4.2 PASSWORD Move the cursor to【PASSWORD】（Icon highlighted when selected）, press【Enter】to enter into the setting interface.
VIDEO SYSTEM: press【Enter】to switch camera system, has PAL and NTSC two options VIDEO PORT: there are two options: live-out and spot-out, correspond with the two video out on the back panel of DVR, live out means it will display the channel loop function, and spot-out means just display the live view. DWELL TIME: the interval for channel loop function SEQUENCE: you can setup the channel sequence as you want here.
System language have Chinese and English two options, you can setup the language you want in here. Remark: The device will restart when you setup system language success.
3 IE OPERATION 3.1 FEATURE Through the IE browser of OS and install the software, you are able to do the network operation remotely, which is much more convenient. DVR support C/S, B/S, and visit in LAN and WAN, also support IP and domain name visiting. Remark: Operating system Windows XP, Windows Vista and Browser IE6.0, IE7.0 is recommended 3.2 USER LOGIN Input the DVR local IP in IE browser, when changed the port, you should add the port number after IP address, e.g. if DVR local IP is 192.168.3.
Remark: If you connect the device in WAN, the IP should be a public IP. 3.3 OPERATION INTERFACE There are Live view, Playback and Setup options in the main interface, please press them to access it. 3.3.1 Click 3.3.1.1 LIVE to enter into the interface as followings PTZ CONTROL Change the focus, preset aperture to control the PTZ. Click to up/down/left/right control movement of the PTZ.
key in the center of the wheel. 3.3.1.1.1 ZOOM Click to zoom in and out. Click to focus Click 3.3.1.1.2 to change the size of aperture PTZ PRESET Setup preset point. You can control it via the below three buttons: 3.3.1.2 PLAY Move cursor to the icons, it will highlighted when selected Open all windows.
You can open, shut down and start this channel’s record via shortcut menu. 3.Click right key at one live view screen, click” open all windows” or “ close all windows”, will quickly open/close all windows. 3.3.2 REPALY Click record file in DVR.
Double click one item of listed recording video, the recording video will playback, meanwhile the file icon will change to , and will occur the below picture play buttons: The above purple progress bar shows download progress, green progress bar shows playback progress Switch between pause/play Stop play Fast play Slow play Pause at next frame Convert H.264 file to H.avi file, click this button access into file convert setting interface, as follow.
SOURCE FILE: Click DESTINATION FILE: Click to setup the H.264 file to convert to setup the directory for saving AVI file After setting, click , file convert start, the convert progress bar (see below picture) will see the progress of convert. 3.3.3 SETUP to enter into setup interface, this interface include record, alarm, PTZ, Click network, setting and system information six menus. 3.3.3.1 RECORD Click in GUI of DVR. 3.3.3.
3.3.3.3 PTZ Click GUI of DVR.
3.3.3.4 NETWORK Click GUI of DVR. 3.3.3.5 to enter into setup interface; you can check the parameter settings as in SETTING Click GUI of DVR.
BANDWIDTH: Set the amount of bandwidth in kbps (128k、192k、256k、384k、512k、1024k) that you want to allocate for traffic that matches internet, this bandwidth not include audio. Remark: the normal ADSL network is between 256k and 384k FILE SAVE PATH: capture picture and recording video save path. IE PASSWORD: setup the password when you login IE DST settings you can check as DVR setting. 3.3.3.
4 DVR INSTALLATION 4.1 PRODUCT OVERVIEW 1. The Definition of Buttons and Connectors on Front Panel Buttons on Front Panel Item Silk-Screen Description 1 ON/OFF POWER ON/OFF 2 Mouse USB mouse REC Recording ALARM Alarm HDD1 HDD1 Status HDD2 HDD2 Status HDD FULL On means the HDD is full.
2.
3. Connectors for Alarm Peel off the color skin of the cable and then insert the cable into the slot on the rear panel DVR (The connection part for alarm).
4． Alarm Input and Output There are 8 sets alarm input connector and 1 set output for this DVR. Alarm input is for connection IR annunciator, fog sensor.
5.
4.2 HDD INSTALLATION Please installation the HDD as the following steps: 1）Open the cover of the DVR and then you will see one HDD plate as follow. 2）Connect HDD line as follow . 3）Affix HDD on HDD plate as indicated below with the screws around. 4）Install the HDD plate back into DVR and close cover .
5.FAQ 1. If your problem is not listed below, please call our toll-free number for more support. Question: DVR is not working after starting？ Answer: Check the adaptor input Check the on-off power line, is it well-connected? Check the power on-off Check the upgrade procedure Check the main board of DVR 2.
5. Question: What is meaning of“R”“M”“I”“H” showed in interface? Answer: “R”means the channel is recording “M” means the channel is on motion detection “I”means the channel is on alarm “H” means there is either no HDD. the HDD is bad or the HDD is full 6.
stop recording when it is in "start recording" or the video is in video plan. If you want to stop recording, please set the time to not recoding. 12. Question: Motion detection is not working? Answer: : The setting of motion detection area is not correct Sensitivity is too low 13. Question: CD-writer /USB backup error Answer: The data exceeds the capacity of backup device The backup device is incompatible The backup device is damaged 14.
