Owner manual

28
28
INSTRUCTION MANUAL
16 SYSTEM
Use the System menu to update system firmware and set an automatic system reset
schedule.
Figure 2.4.2.16 system
To enable auto-reset:
1） Under AUTO RESET, select ON. The Settings option appears.
2） Under SETTINGS, select EVERY DAY, EVERY WEEK, or EVERY MONTH. The
date drop-down menu appears.
3） Select the date for auto-reset from the drop-down menu.
4） Enter the time for auto-reset using the Virtual Keyboard (mouse only).
5) Click APPLY. Click CLOSE in the confirmation window
To restore factory settings:
1） Click DEFAULT SETTINGS. This will restore the system to the original factory
settings.
2） Click OK in the prompt.
NOTE: Recorded video on the HDD will not be erased.
To restart the machine (soft-reset):
1） Click RESTART.
2） Click OK in the prompt. The system will perform a soft-reset and load to a live
split-screen view.
To upgrade firmware:
1） Copy the firmware file to an empty USB flash drive. The firmware file should not
be in a folder.
2） Connect the USB flash drive to the top USB port on the front panel of your
system.
3） Open the System Menu (Main Menu>Advance>System).
4） Click FIRMWARE UPDATE. The system will scan the USB flash drive and begin
updating the firmware. Do not remove the USB flash drive while the upgrade is
taking place.