Owner manual

27
27
INSTRUCTION MANUAL
5） Right-click anywhere on the screen to return to the Motion Detection menu.
6） Click APPLY. Click CLOSE in the confirmation window.
7） Click EXIT in all menus until all windows are closed.
NOTE: You can disable the MD buzzer in the Alarm Setup menu.
15 MOBILE
Send alerts to your cellular phone Windows Mobile enabled touch-screen smart
phone (Windows Mobile 6.0 or greater, S60 3
rd
or greater is required).
Figure 2.4.2.15 mobile
To configure mobile notification settings:
1） Under MOBILE NETWORK, select 3G,2.75G, or 2.5G.
NOTE: Contact your cellular provider if you are unsure about the network of your cellular
phone.
2） Under MOBILE PORT, enter your mobile port number.
3) Click APPLY. Click CLOSE in the confirmation window.
4) Click EXIT in all menus until all windows are closed.