Owner manual

INSTRUCTION MANUAL

11 ADVANCE

Use the Advanced Setup menu to configure alarm settings, motion detection,

mobile surveillance, PTZ settings and network settings. The Advanced Setup menu

contains the following sub-menus: Alarm, Info, MD, Mobile, System, PTZ, and Network.

Figure 2.4.2.11 Video/Audio menu

12 ALARM

Use the Alarm menu to configure alarm and email settings.

NOTE: External alarm devices must be connected to the alarm block on the rear panel of

the system in order to use the I/O (input/ output) alarms of the system.

Figure 2.4.2.12.1 Alarm setup menu

To configure alarm settings:

1） Under I/O CHANNEL, select NO (Normal Open), NC (Normal Closed), or OFF.

Click NEXT PAGE to view additional channels (8-channel models only).

2) Apply loss alarms to the following:

• HDD LOSS: The alarm will sound if the internal HDD is damaged

• HDD SPACE: The alarm will sound when the HDD is full (overwrite must be

disabled)

• VIDEO LOSS: The alarm will sound when a camera is disconnected

3) Under ALARM MANAGE, configure the following:

• OUTPUT: Set the output time (in seconds) on the spot monitor from 0s, 10s,