User Manual

6 Other setting
6.1 Start recording
Press REC to start recording, screen
displays as below
Only in “Part” mode, DVR can support
enlarging single channel to full screen
1. Record mark
2. Channel name
3. Record mode (whole or part)
4. Working state REC, PLAY,
FWD, REW PAUSE
5. HDD info
6. Record process: (T)Time seg
ment record mode, (M) Motion detection record mode; (-) close recording of the time
segment
7. Video date
6.2 Stop record
To stop recording, enter correct password, then press STOP .
6.3 Record time
In Part mode, estimated record time (hours) for 120G HDD.
Estimate record time (hours) of 120G HDD @ 7fps@standard quality
The formula is: 120(G Byte) x1024(M Byte) x 1024 (K Byte)
15 (K byte / frame) x 7 (frame / sec.) x 60 (sec.) x 60 (min.), Estimated time = 332 Hours.
Image quality Speed rate 30 15 7 1
High 20 58 117
251
1748
Middle 15 78 155 333 2330
NTSC
Low 12 97 194 416 2913
Image quality Speed rate 25 12 6 1
High 20 70 146
291
1748
Middle 15 93 194 388 2330
PAL
Low 12 117 243 485 2913