Instruction Manual

Digital Video Recorder User Manual
11
Items Names Functions
1 ALARM IN Connect to external sensor 1-4
2 ALARM OUT
Relay output. Connect to external alarm.
3 GND
Grounding
4 RS485
Connected to speed domes
5 NET(RJ45 PORT)
Connected to internet
6 AUDIO IN
Audio input 1-2, connect to MIC or other audio capture devices
7 S-VIDEO
S-Video output, connect to monitor
8 VIDEO OUT
Connect to monitor
9 USB PORT
To connect mouse or external USB devices like USB flash, USB
HDD for backup or update firmware
10 AUDIO OUT
Audio output, connect to the sound box
11 VIDEO IN
4ch Video input
12 POWER INPUT
DC 12V
13 POWER SWITCH
Power on/off
2.4 Remote Controller Introduction
2.4.1 Use Remote Controller
Notice: Please note that Remote Controller is not a standard part of this DVR. Your package might exclude it.
Steps of using Remote Controller are described as below:
1. Open the battery cover of Remote Controller.
2. Put into two AAA batteries with correct order.
3. Put back the battery cover.
If the Remote Controller does not work, please check the followings: