User Manual

User Manual
Menu
Directory
Camera Setup
Record Setup
Record Frame rate
Video Quality
7
Record Schedul
e
Sensor Setup
Hard Drive Setup
Miscellaneous Setup
Network Setup
Language
Change Password
Set Time
Hidden Channel
Audio Port Setup
PTZ Setup
Image Parameters
Password Enable
Keypad Tones
SEQ.Dwell Time
Main Menu
Reset Menu
5.3 Camera Setup
Note：If a camera channel is set to OFF ,it will not be recorded(Refer to 6.4
Record Setup)
5.4 Record Setup
1 ON 2 ON
CAMERA SETUP
3 ON 4 ON
( )MOVE (SEL) SELECT (MENU)EXIT
1 ON 2 NOCAM
RECORD SETUP
3 ON 4 ON
( )MOVE (SEL) SELECT (MENU)EXIT
Camera Setup allows you to turn
cameras on or off.
Press [▲, ▼, ◄◄ and ►►] buttons
to select a channel and then press [SEL]
to modify the setting ON or OFF.
Record Setup allows you to set up
recording channels.
Press [▲, ▼, ◄◄ and ►►] buttons to
select a channel, and then press [SEL] to
modify the setting to ON or OFF.
If a channel is disabled in Camera Setup, it
will not record and the DVR will display
“NOCAM” on screen.